Automatic oil separator 980Y
Kitchen oil separator 980Y, Automatic oil separator 980Y
Equipment introduction:
This series of grease separator can meet the use of multiple models of Kitchen Basin, cabinet, stove and dishwasher. It has the characteristics of remarkable effect and convenient maintenance. It is a special automatic grease separator with the highest quality in the market.
Scope of application:
The equipment is widely used in the treatment of oily wastewater from catering in commercial squares, supermarkets, hotels, snack cities, schools, hospitals, enterprises and institutions, public canteens, airports, stations and so on.
Product features:
Good oil separation effect, national environmental protection certified product
It has strong applicability and can meet all standard under the table installation in the kitchen
Simple and convenient maintenance, side pull slag filter box, automatic grease collection
High intelligence, constant temperature heating, intelligent reminder.
Installation instructions:
After unpacking, check whether the product model and accessories are complete
One raw material belt, 4 lifting wheels, 18 lifting wheel screws, 1 M4 wrench, 2 elbows, 2 tees, 5 direct wire pairs, 7 bushing, 5 water pipe gaskets, 2 pipe hoops, 1 oil collecting box, 1m steel pipe, 1 double 16mm pipe fitting, 2 double 38mm pipe fittings, 1 product manual, 1 product certificate, 1 Dn40 manual ball valve, 1 dn403 through and 1 Dn40 elbow, One Dn40 pair wire and one Dn40 direct wire
Spare parts for installation equipment body
Equipment bottom caster
Installation of water valve at cleaning port
The water outlet is connected with the silt discharge port
Complete the installation of pool accessories
After the equipment is in place, connect the water tank with the equipment water inlet
The equipment drain is connected to the sewer pipe, and the sewer is unobstructed
Inject water into the equipment through the pool
When there is water flowing out of the drain, the water injection can be stopped
Check the sewage leakage of the connecting pipe fittings, and then turn on the power supply
Turn on the power switch
Check that the time displayed by the controller is accurate. If it is out of synchronization, adjust the time manually
After setting, be sure to install the controller keystroke protector in place
Drain the water in the oil-water tank directly into the equipment. After the water is dry, manually pull out the slag box, guide the garbage in the slag box into the garbage can, and clean it regularly every day
Clean the waste grease in the oil collecting box regularly every day. Take out the oil collecting box after the oil scraping indicator is off
Cleaning precautions
Clean once a week. During cleaning, open the sludge discharge valve and vent the water. After venting, open the valve at the cleaning port for internal cleaning. Open the valve at the clean water outlet for 10 seconds and stop for 20 seconds. Repeat this three times for better effect
After cleaning, fill the equipment with water, and turn on the power supply when the water outlet gives water
Note: when the equipment is ready for cleaning, first disconnect the power supply to prevent other faults caused by the dry electric heating pipe
