G Single Screw Pump

G Single Screw Pump--Product overview

G Single Screw Pump is a positive displacement pump derived from the Archimedes screw pump. It relies on the screw shaft (rotor) and the rubber sleeve (stator) to mesh with each other. When the power end drives the rotor around the center of the stator through a universal joint, the rotor and The stators are continuously meshed to form vacuum chambers. These vacuum chambers move in a uniform axial direction to transport the conveying medium from the inlet to the outlet. The medium sucked into the vacuum chamber flows through the stator without being agitated or damaged. The flow rate is proportional to the speed. The eccentric single screw pump is widely used in food metallurgy, papermaking, printing and dyeing, chemical, fertilizer and pharmaceutical industries. The transmission can be directly driven by couplings, or high-speed motors, V-belts, gearboxes, etc. Device variable speed.

G Single Screw Pump--Model significance

G Single Screw Pump--Product features

G Single Screw Pump product features: few parts, compact structure, small size, simple maintenance, rotor and stator are the vulnerable parts of single screw pump, simple structure, easy to assemble and disassemble. It is a new type of pump that works according to the principle of revolving meshing positive displacement.
To
The main working parts of G type single screw pump are eccentric screw (rotor) and fixed bushing (stator). Using non-toxic and tasteless edible rubber, the working temperature can reach 120 degrees Celsius. If the high temperature is 120 degrees Celsius-350 degrees Celsius, you can contact this unit. Due to the special geometry of the two parts, separate sealed cavities are formed respectively.
To
The medium promotes the flow evenly from the axial direction. The internal flow rate is low and the volume remains unchanged. The pressure is stable, so there is no product turbulence and agitation. The output pressure of each stage pump is 0.6MPa-1.2MPa, and the head is 60m-120m (clean water).

G single screw pump not only has the characteristics of good self-priming performance and high suction height when conveying various low viscosity media; moreover, the screw pump has fewer parts, simple structure and small volume, and convenient maintenance. The rotor and stator are single screw pumps. The wearing parts and the structure are simple and easy to replace.

The main working parts of G-type eccentric single screw pump are eccentric screw (rotor) and fixed bushing (stator). Using non-toxic and tasteless edible rubber, the working temperature can reach 120 degrees Celsius. If the high temperature is 120 degrees Celsius-350 degrees Celsius, it can be the same as this unit. Due to the special geometry of the two parts, separate sealed cavities are formed respectively. The medium promotes the flow evenly from the axial direction. The internal flow rate is low and the volume remains unchanged. The pressure is stable, so there is no product turbulence and agitation. The output pressure of each stage G screw pump is 0.6MPa-1.2MPa, the head is 60m-120m (clear water), and the self-priming height is generally above 3m. It can be used as a self-priming sewage pump product.

G Single Screw Pump--Product structure

G Single Screw Pump--Scope of application

G single screw pump is a commonly used pump product. The flow can be adjusted by changing the speed of the pump according to user requirements. The running speed can be adjusted from low to high. The outlet pressure of the pump is divided into two stages, each stage The pressure is 0.6mpa, G type screw pump is widely used with:

1. The application of various sewage treatment industries, the transportation of sewage slurry containing solid particles and short fibers, is especially suitable for supporting pumps with oil-water separators or plate and frame filter presses.

2. The G single-screw pump can be used as a cleaning pump for cabin splints, as an oil pump for transporting various oil products in the petrochemical industry, and can also be used to transport oil-water mixtures and polymers into the formation.

3. The G single screw pump is used in the pharmaceutical or daily chemical industry to use high-viscosity pumps to transport various viscous liquids, emulsified liquids, or various ointment cosmetics.

4. G-type single screw pump can be used in the food industry to transport viscous starch, edible oil, honey, syrup, jam, milk, meat froth or leftovers.

5. The speed-adjustable high-viscosity single screw pump can also transport various viscous liquids such as fermented viscous slurry, distiller's grains, grain product slag, and other solids.

6. High-viscosity inks or PVC polymer plastic slurries used in the printing and paper industry and paper pulps of various concentrations.

7. The speed-adjustable high-viscosity screw pump can also be used for the transportation of coal water slurry.

G Single Screw Pump--Product parameter