MFC electromagnetic flowmeter

Characteristics of mfc201 high precision electromagnetic flowmeter
1) There are no flow blocking and moving parts in the measuring pipe, so it will not cause additional energy loss or blockage. It has remarkable energy-saving effect. It is especially suitable for the measurement of liquid-solid two-phase flow, such as sewage, mud, mineral pulp, coal water slurry, pulp, etc.
2) Only the lining and electrode are in contact with the measured medium. As long as the lining and electrode materials are reasonably selected, good corrosion resistance and wear resistance can be achieved. Therefore, various chemical solutions such as strong acid and alkali can be measured.
3) The installation requirements are low. The front straight pipe section is only 5D, and the rear straight pipe section is 2D (D is the inner diameter of the selected instrument).
4) The measurement accuracy is high, up to ± 0.2% of the indicated value, and the flow in both positive and negative directions can be measured.
5) The instrument adopts dual frequency excitation mode, which is not affected by power frequency and works stably and reliably.
6) Chongqing Chuanyi mfc201 high precision electromagnetic flowmeter has low power consumption, less than 20VA.
7) The converter has good interchangeability and can achieve accuracy without re real current calibration.
8) Wide measuring range.
9) After the pipeline is empty, it will automatically detect and set the data to zero and alarm to prevent misoperation of flowmeter data caused by empty pipe interference.
10) The electrode seal adopts a unique double sealing mode of conical seal and wire seal to ensure no leakage.
11) The input impedance of the converter is greater than 1012 ohms, which can effectively prevent the influence of scaling on the sensor and is suitable for the measurement of low conductivity media.
12) The EMC (electromagnetic compatibility) index of the flowmeter meets the requirements of iec61000-1995 standard.