IHG vertical stainless steel chemical pump

IHG vertical stainless steel chemical pump--Product overview
IHG chemical centrifugal pump is designed based on the performance parameters of IH and ISG centrifugal pumps. At the same time, according to the use temperature and medium, it is derived from the ISG centrifugal pump suitable for hot water pumps, high temperature pumps, and corrosion Sexual chemical pumps, oil pumps. The product has the advantages of high efficiency and energy saving, low noise, reliable corrosion resistance, stable operation and so on.

IHG vertical stainless steel chemical pump--Model significance

IHG vertical stainless steel chemical pump--Product features

1. The stainless steel chemical pump has a vertical structure, the inlet and outlet have the same caliber, and are located on the same center line. It can be installed in the pipeline like a valve. It has a compact and beautiful appearance, small footprint, and low construction investment. If you add protection The cover can be used outdoors.

2. The impeller is directly installed on the extended shaft of the motor. The axial size is short, the structure is compact, and the bearing configuration of the pump and the motor is reasonable, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.

3. The shaft seal adopts a mechanical seal or a combination of mechanical seals. It adopts imported titanium alloy seal ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively extend the service life of the mechanical seal.

4. Convenient installation and maintenance, no need to dismantle the pipe road system. All the rotor parts can be drawn out by removing the nut of the pump joint base.

5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.

6. The vertical and horizontal installation of the pump can be adopted according to the requirements of pipeline layout.

IHG vertical stainless steel chemical pump--Work condition

1. Suction pressure ≤1. 0MPa, or the maximum working pressure of the pump system ≤ 1.6 MPa, that is, pump suction inlet pressure + pump head ≤ 1.6 MPa, and the pump static pressure test pressure is 2.5 MPa. Please indicate the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6 MPa, it should be stated separately when ordering, so that the flow-through part and the connection part of the pump are made of cast steel.

2. Ambient temperature <40℃, relative humidity <95%.

3. The volume content of solid particles in the conveyed medium does not exceed 0.1% of the unit volume, and the particle size is less than 0.2mm.

Note: If the medium used is with fine particles, please specify when ordering so that the manufacturer can use wear-resistant mechanical seals.

IHG vertical stainless steel chemical pump--Structure diagram

IHG vertical stainless steel chemical pump--Product parameters