WQ non-clogging submersible sewage pump

WQ non-clogging submersible sewage pump--Product overview

QW (WQ) type non-clogging submersible pump is a new generation of pump products successfully developed based on the introduction of foreign advanced technology and combined with the characteristics of domestic water pumps. It has significant energy-saving effects, anti-winding, non-clogging, automatic installation and automatic It has unique effects in discharging solid particles and long-fiber waste.

This series of submersible pumps uses a unique impeller structure and a new type of mechanical seal, which can effectively transport solids and long fibers. Compared with the traditional impeller, the impeller of the pump adopts a single-channel or double-channel form, which is similar to an elbow with the same cross-section and has very good flowability. Equipped with a reasonable volute, the pump is efficient The high and impeller have undergone dynamic and static balance tests, so that the pump has no vibration during operation.

WQ non-clogging submersible sewage pump--Model significance

WQ non-clogging submersible sewage pump--Product features

1. The unique single-leaf or double-blade impeller structure greatly improves the dirt passing capacity, and can effectively pass 5 times the diameter of the pump diameter and solid particles with a diameter of about 50% of the pump diameter.

    2. The mechanical seal adopts a new type of hard and corrosion-resistant titanium tungsten material, which can make the pump safe and continuous operation for more than 8000 hours.

3. The overall structure is compact, small in size, low in noise, significant in energy saving, convenient for maintenance, no need to build a pump room, and can work when submerged in the water, which greatly reduces the project cost.

4. The pump sealed oil chamber is equipped with a high-precision anti-interference water leakage detection sensor, and thermal elements are embedded in the stator winding to automatically protect the water pump motor. To

5. It can be equipped with a fully automatic control cabinet according to user needs to automatically protect the pump from water leakage, leakage, overload, and over-temperature, which improves the safety and reliability of the product

6. The float switch can automatically control the start and stop of the pump according to the change of the required liquid level, without the need for special personnel to supervise, and it is extremely convenient to use. 7. The QW (WQ) series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance, and people do not need to enter the sump for this.

    8. It can be used in the whole head, and the motor will not be overloaded.

    9. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

WQ non-clogging submersible sewage pump--Structure diagram

WQ non-clogging submersible sewage pump--Product parameters