IH horizontal chemical centrifugal pump

IH stainless steel horizontal centrifugal pump--product overview

The IH chemical centrifugal pump is suitable for chemical plants. It is used to transport corrosive liquids that do not contain solid particles and have a viscosity similar to water. The temperature of the transported medium is generally 20°C to 105°C. The maximum working pressure of the pump is 1.6 Mpa, and the inlet pressure is not higher than 0.6 Mpa.

IH stainless steel horizontal centrifugal pump--product features

1. Smooth operation: The absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation and no vibration.

2, dripping water does not leak: the cemented carbide seal of different materials ensures that there is no leakage in the transportation of different media.

3. Low noise: The water pump under the two low-noise bearings runs smoothly, except for the faint sound of the motor, which is basically no noise.

4. Low failure rate: The structure is simple and reasonable, and the key parts are equipped with international first-class quality, and the trouble-free working time of the whole machine is greatly improved.

5. Convenient maintenance: replacement of seals and bearings is simple and convenient.

6. ​​Less land occupation: The outlet can be left, right, and up in three directions, which is convenient for pipeline arrangement and installation and saves space.

7. It is used for transporting clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom cooling and heating, etc. Water cycle pressurization and supporting equipment, use temperature T≤80℃.

8. It is widely used in: metallurgy, chemical industry, textile, papermaking, and hotels and restaurants and other boiler hot water pressurized circulating transportation and urban heating systems, ISWR type operating temperature T≤120℃.

9. It is used to transport liquids that do not contain solid particles, are corrosive and have a viscosity similar to water. It is suitable for petroleum, chemical, metallurgical, electric power, papermaking, food and pharmaceutical and synthetic fiber sectors. The operating temperature is -20℃～+120℃ .

10. It is used to transport gasoline, kerosene, diesel and other oil products or flammable and late-explosive liquids. The temperature of the transported medium is -20℃～+120℃.

IH stainless steel horizontal centrifugal pump-working conditions

1. The suction pressure is ≤1.0Mpa, or the maximum working pressure of the pump system is ≤1.6Mpa, that is, pump suction inlet pressure + pump head ≤ 1.6Mpa, and the pump static pressure test pressure is 2.5Mpa. Please indicate the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6Mpa, it should be stated separately when ordering. In order to make the pump's flow-through parts and connection parts use cast steel materials. To

2. Ambient temperature <40℃, relative humidity <95%. To

3. The volume content of solid particles in the conveyed medium does not exceed 0.1% of the unit volume, and the particle size is less than 0.2mm.

Note: If the medium used is with fine particles, please specify when ordering so that wear-resistant mechanical seals can be used.

IH stainless steel horizontal centrifugal pump-structure diagram

IH stainless steel horizontal centrifugal pump--product parameters