How to choose the model of gear oil pump

KCB gear pump: This product is widely used in national defense, petroleum, chemical, metallurgy, textile, transportation, pharmaceutical, food, paper and other industrial sectors. It is suitable for conveying various lubricating liquids, the temperature is not higher than 80℃, the viscosity is 5-1500mm2/S, and the working pressure is 0.28-1.45MPa. Not suitable for conveying strong corrosive and hard particles or fibrous liquids.

YCB gear pump: YCB-G series heat preservation gear pump is developed on the basis of YCB series arc gear pump and has the advantages of arc gear pump.

This series of pumps is designed with a thermal insulation jacket on the pump body, which can use heat transfer oil, steam, hot water, cold water and other media to heat, keep warm or cool the conveying medium.
This series of gear pumps is suitable for conveying heavy oil, asphalt, resin, detergent, glue and other media that are easy to solidify at room temperature without solid particles and the working temperature is not higher than 300 °C, and is suitable for outdoor installation in alpine areas and Occasions where thermal insulation is required during the process.

2CY gear pump is mainly composed of gear, shaft, pump body, pump cover, bearing sleeve, shaft end seal (special requirements, optional magnetic drive, zero leakage structure) and so on. The gears are nitrided to have higher hardness and wear resistance. Installed with the shaft to run in a replaceable bushing. The lubrication of all parts in the pump is automatically achieved by using the conveying medium when the pump is working.

The four bearing sleeves in the pump are installed floating in the pump, and the end face clearance is automatically adjusted according to the working pressure, so the pressure of the pump is stable, the output flow pulsation is small, and the dissolution efficiency is high. It rotates clockwise as viewed from the extended end of the main shaft to the pump.

Performance range:

2CY gear oil pump is suitable for conveying lubricating oil or properties without solid particles and fibers, non-corrosive, temperature not higher than 80℃, viscosity of 5×10-6～1.5×10-3m2/s (5-1500cSt) Other fluids like lubricating oils and for hydraulic rotating systems.

LB type gear pump for freezer: suitable for conveying no solid particles and fibers, non-corrosive, temperature not higher than 80 ℃, viscosity 5~1500ST CHY type gear pump: CH, CHY type gear pump is used for conveying viscosity Under 200°E (1500mpa.s), various other media with similar lubricating properties and properties, such as mechanical oil and turbine oil without solid particle impurities, have a temperature not higher than 120°.

K1P gear pump: oil pump displacement: cm3/r. High efficiency, low energy consumption, convenient operation, easy maintenance, sturdy structure and long service life.

HGP type gear pump: The internal gear contacts of the QT internal gear pump are smooth, and the continuous rotation is silent. Its characteristic is a special gear design, and its sound is extremely low when used, even at high speed, the audio is still smooth and peaceful.